При использовании бондинга ошибка в логах, хотя всё работает.

Linux fserver 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64

root@fserver:~# dmesg -l err
[    9.168555] bond0: (slave enp1s0f0): invalid new link 3 on slave
[    9.168596] bond0: (slave enp6s0): invalid new link 3 on slave
[    9.376654] bond0: (slave enp1s0f1): invalid new link 3 on slave
[   10.000549] bond0: (slave enp1s0f2): invalid new link 3 on slave
[   10.208663] bond0: (slave enp1s0f3): invalid new link 3 on slave

root@fserver:~# ethtool bond0
Settings for bond0:
        Supported ports: [  ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 6000Mb/s
        Duplex: Full
        Auto-negotiation: off
        Port: Other
        PHYAD: 0
        Transceiver: internal
        Link detected: yes

root@fserver:~# cat /etc/network/interfaces
auto enp6s0
iface enp6s0 inet manual
    bond-master bond0
    bond-mode balance-alb

auto enp7s0
iface enp7s0 inet manual
    bond-master bond0
    bond-mode balance-alb

auto enp1s0f0
iface enp1s0f0 inet manual
    bond-master bond0
    bond-mode balance-alb

auto enp1s0f1
iface enp1s0f1 inet manual
    bond-master bond0
    bond-mode balance-alb

auto enp1s0f2
iface enp1s0f2 inet manual
    bond-master bond0
    bond-mode balance-alb

auto enp1s0f3
iface enp1s0f3 inet manual
    bond-master bond0
    bond-mode balance-alb

auto bond0
iface bond0 inet static
    address 192.168.0.22
    netmask 255.255.255.0
    network 192.168.0.0
    gateway 192.168.0.1
    dns-nameservers 192.168.0.1
    bond-slaves enp6s0 enp7s0 enp1s0f0 enp1s0f1 enp1s0f2 enp1s0f3
    bond-mode balance-alb
    bond-miimon 100
    bond-downdelay 200
    bond-updelay 200
    mtu 9000